How to Resolve Fungi on the Camera Lens

The fungus attached to the lens is caused by moisture trapped inside or on the lens surface. If the temperature warms up, fungus can appear due to the humidity. The fungus that grows on this lens can look like a spider’s web on the inner surface of the lens. Here are ways you can do to deal with fungus

A. Resolve mold on the interior of the lens

The best way to avoid this fungus is to prevent moisture from entering the camera. However, this is difficult to do if you yourself live in a climate like Indonesia. The best way you can do is not to use the camera in high humidity and also during the rainy season.

  • Precautions when the camera is wet

When the camera is already wet, you should immediately dry it. You do this by opening the camera compartment and put it in a zipped plastic bag with silica gel in it or rice. If the camera has a removable lens, remove the lens and put it in plastic with silica gel or rice in it.

  • Store the camera in a dry place

If you must use the camera in high humidity, make sure you store the camera in a dry, cool place afterwards. This place should allow enough light to enter because most fungi like to grow in the dark.

However, do not leave the lens and camera in direct sunlight for a long time. Excessive heat can damage the camera parts and lenses made of plastic.

  • Efforts to clean the fungus

Mold tends to grow between the glass elements and it is very difficult to clean without damaging the lens components. Sending it to a lens repair center is a good idea. If you want to try it yourself, it helps you do the drying process like the points above.

B. Resolve mold on the exterior of the lens Michaelkors Outlet

  • Clean fingerprints and oil from the camera

The fungus can land on the camera and lens when you touch the surface of the lens and viewfinder. Try to avoid leaving fingerprints in this area and wipe fingerprints with a clean, dry cloth. Although fungus usually grows inside the camera area, but fungus also grows on the outside due to this fingerprint.

  • Do not blow the lens

Never clean the dust that sticks to the lens by blowing it. Humidity arising from the exhalation can cause mold on the surface area of ​​the lens. Instead of being blown using the mouth it is better to use a blower and a dry, clean cloth.

  • Clean the fungus immediately

If you finally find mold on the exterior of the lens and the camera, the lens should be cleaned immediately. The liquid between vinegar and water placed on a clean cloth can clean the fungus in this exterior area.

The fungus is the most stubborn disease in the affairs of this camera and lens. More attention is needed so that the fungus does not easily stick to your camera and lens. So, do not let the careless care of your camera lens, yes!

Leave a Reply

Your email address will not be published. Required fields are marked *